Smart Bidding Exploration: how to set the ROAS tolerance

How Smart Bidding Exploration works in Shopping and Performance Max, how to choose the ROAS tolerance from your margins, and when not to turn it on.
Smart Bidding Exploration lets a Target ROAS Shopping or Performance Max campaign bid on queries it would otherwise skip by lowering its ROAS target by a tolerance you choose, from 5% to 30%. With a 200% target and a 10% tolerance, the effective target becomes 180%, and Google says to expect results within about 15% of that effective target over one to two conversion cycles. The safe way to pick the tolerance is to work back from your break-even ROAS, then run it on a product segment rather than the whole catalog.
This guide covers the requirements, how the tolerance math works, how to choose it from your margins, when to use exploration instead of seasonality adjustments or Promotion mode, and how to read the results.
What is Smart Bidding Exploration for Shopping and Performance Max?
Google's help page describes it as a setting that lowers your target ROAS by up to the tolerance you select, giving the bidding algorithm room to bid higher on high-potential queries. It does not widen your targeting: it "doesn't expand your broad match keywords", it helps you win long-tail queries you already qualify for but were losing at your current target.
The difference from simply lowering your Target ROAS is selectivity. Google's comparison page says exploration bids selectively on unique traffic slices, while a manual target change raises bids uniformly across all eligible traffic. Exploration is meant for capturing long-tail queries over an extended period, not for a short sale.
The feature started on Search in 2025. For retail, Google's Accelerate page announcing the expansion to Shopping and Performance Max with product feeds was published in May 2026 and, as of November 16, 2026, still says it "will soon" be available. PPC Land reported on October 25, 2026 that Google's Ads Liaison Ginny Marvin had described it as fully launched for retail Performance Max and Shopping campaigns on October 16. Check your campaign settings: if the option is there, you can use it.
Which campaigns can use Smart Bidding Exploration?
According to Google's help page, as of November 2026:
- Campaign types: Search, Shopping and Performance Max, with or without a Merchant Center feed.
- PMax with a feed: one toggle turns on exploration for both Search and Shopping traffic.
- PMax without a feed: exploration applies to Search traffic only.
- Bid strategy: Target ROAS is required.
- Campaign-level strategy for retail: portfolio bid strategies work only for Search. Moving a Shopping or PMax campaign to a portfolio strategy automatically deactivates exploration.
- Budget: the campaign should not be limited by budget. If it hits its budget limit, the system may pause exploration.
- AI Max: fully compatible with Search and Shopping campaigns running AI Max.
Google's reporting guidance adds one more condition worth treating as a rule: testing exploration on a brand-new campaign with no historical data is "strongly discouraged".
How does the ROAS tolerance work?
The tolerance is a percentage of your target, not percentage points. A 10% tolerance on a 400% target gives 360%, not 390%. Google's setup page also reminds you to account for ad group targets or bid adjustments when working out the effective target.
The table applies each tolerance to a 400% target. The last column is our own arithmetic: the effective target minus 15%, the low end of the range Google says to expect.
| Tolerance | Effective target (from 400%) | If ROAS lands 15% below the effective target |
|---|---|---|
| 5% | 380% | 323% |
| 10% (Google's suggested start) | 360% | 306% |
| 20% | 320% | 272% |
| 30% (maximum) | 280% | 238% |
Google's best practices page recommends starting with a 10% tolerance.
How do you choose the tolerance from your break-even ROAS?
Exploration is a deliberate trade of efficiency for volume, so the floor is the ROAS at which an order stops making money. Break-even ROAS is 1 divided by your margin after cost of goods and variable costs: a 40% margin gives a break-even ROAS of 250%. Our guide to POAS vs ROAS explains how to calculate margin per product.
A simple rule: pick the largest tolerance where the effective target, minus 15%, stays above break-even.
- Calculate break-even ROAS for the products in the campaign (1 / margin).
- Take your current Target ROAS, including any ad group targets.
- Test each tolerance: effective target = target x (1 - tolerance); worst case = effective target x 0.85.
- Keep the highest tolerance whose worst case is above break-even. With a 400% target and 40% margin (break-even 250%), 20% passes (272%) and 30% fails (238%).
- Start lower anyway if the campaign mixes products with very different margins, because the average hides the low-margin items.
That last point is the main reason to segment before you explore.
Should you explore the whole catalog or a product segment?
A segment. A campaign-wide tolerance applies the same lower target to products that are already unprofitable and to products that win every auction they enter. Exploration pays off most on products with healthy margins and good conversion rates that lose impressions at the current target.
In practice, split your catalog with custom labels (custom_label_0 to custom_label_4 in Merchant Center), give the strong performers their own Shopping campaign or PMax campaign, and turn on exploration there only. Because retail campaigns must use a campaign-level Target ROAS for exploration, each segment gets its own target and tolerance. If custom labels are new to you, our beginner guide to labelizers and custom labels covers the setup, and our post on which products to push on Google Ads shows a profit-first way to pick them.
Building those segments by hand is slow to keep current. Clarmix's product labelizer labels each SKU daily as Profitable, High Potential, Low Potential, Costly, Zero Conversion or Zombies, based on clicks, target ROAS and cost per conversion, and sends the labels to Merchant Center as custom labels through a supplemental feed. A Profitable or High Potential campaign is a natural candidate for exploration; Costly and Zero Conversion products are not.
When should you use exploration instead of seasonality adjustments or Promotion mode?
They solve different problems. Exploration is a standing setting for finding long-tail volume over weeks. The other two are for short, known events.
| Lever | Use it when | How long |
|---|---|---|
| Smart Bidding Exploration | You want more conversions from long-tail queries and accept a lower ROAS, within a tolerance | At least 6 weeks, per Google |
| Lowering Target ROAS | You want more volume across all traffic, not selectively | Ongoing |
| Seasonality adjustments | You expect a short, sharp change in conversion rate, such as a flash sale | A few days |
| Promotion mode | You run a sale event and want bidding to react to it | The sale period |
Should you turn it on before Black Friday?
For most retail accounts, not on your main campaigns. Black Friday falls on November 27, 2026, and three of Google's own guidelines point against a late-November start:
- Google says to exclude the first one to two conversion cycles as ramp-up and to run exploration for at least 6 weeks before final budget or bid decisions. A test started now would be judged on BFCM traffic.
- Seasonal demand distorts the comparison. Google's best practices suggest a campaign experiment with a pre-test and post-test to isolate exploration from seasonal shifts.
- Exploration needs budget headroom, and many campaigns hit budget limits during BFCM, which can pause it.
If you want to start now, pick one stable, budget-uncapped segment with conversion history, use a 10% tolerance, and plan to judge it in January. Our Black Friday Google Ads checklist covers the settings that matter more this month.
How do you set up Smart Bidding Exploration?
From Google's setup page:
- In Google Ads, go to Campaigns and select the eligible campaign.
- Select Settings in the page menu.
- Open "Smart Bidding exploration" and check "Allow Smart Bidding to explore new traffic".
- Set the ROAS tolerance (5% to 30%).
- Select Save. To turn it off, uncheck the box.
Before you save, confirm the campaign uses a campaign-level Target ROAS (not a portfolio), is not limited by budget, and has conversion history.
How do you measure whether exploration worked?
There is no "conversions from exploration" column. Google's reporting page measures it through traffic diversity and overall lift:
- New columns in the campaigns table: Unique search categories with impressions, with clicks and with conversions. A search category is a cluster of queries grouped by intent and meaning.
- Bid strategy report: a light green bar marks the dates exploration was active, and "Avg. target ROAS" already includes your tolerance.
- Lift: compare total conversions and conversion value, excluding the ramp-up period, after at least 6 weeks.
- Accuracy: check that actual ROAS lands within about 15% of the effective target.
For PMax with a feed, exploration also covers Search traffic, so watch where the extra spend goes. Clarmix's PMax Insights dashboard shows spend outside Shopping, including Search, and branded search terms, which helps you see whether new volume is long-tail product demand or your own brand. Google also notes that change history for exploration is fully supported for Search and planned for Performance Max.
Frequently asked questions
Does Smart Bidding Exploration work with Target CPA or Maximize conversion value?
No. Google's help page says campaigns must use Target ROAS bidding. Maximize conversion value without a target and Target CPA are not eligible.
Can I use it with a portfolio bid strategy for Shopping?
No. Portfolio strategies work with exploration only for Search campaigns. Moving a Shopping or Performance Max campaign to a portfolio strategy automatically turns exploration off.
What tolerance should I start with?
Google recommends 10%. Then check it against your margins: the effective target minus 15% should stay above your break-even ROAS. Raise it later only if the first 6 weeks stay within range.
Does exploration expand my targeting?
No. Google says it does not expand broad match keywords or push targeting beyond its current limits. It lets the campaign bid higher on queries it already qualifies for but was losing at the current target.
Sources
- Google Ads Help: How Smart Bidding Exploration for Search, Performance Max, and Shopping campaigns works
- Google Ads Help: Compare Smart Bidding Exploration to other features
- Google Ads Help: Set up Smart Bidding Exploration
- Google Ads Help: Measure and report performance with Smart Bidding Exploration
- Google Ads Help: Best practices for Smart Bidding Exploration
- Accelerate with Google: Smart Bidding Exploration on Shopping
- PPC Land: Google lets Shopping and PMax campaigns lower ROAS targets by up to 30%
Cover photo by Alexander Andrews on Unsplash.
Join our monthly tips!
Get fresh insights on Google Shopping optimization delivered straight to your inbox.



